電氣成套設備日常多保養多檢修,就能延長機器的使用壽命,還能給自己省不少人力和物力,比如維修費用等。那么你知道電氣成套設備的進線開關如何有效保養嗎?
More maintenance and overhaul of the complete electrical equipment can extend the service life of the machine and save yourself a lot of manpower and material resources, such as maintenance costs. Do you know how to effectively maintain the incoming switch of the complete electrical equipment?
1.檢查設備的清潔程度,使用清潔的干布擦掉任何灰塵和油跡,可能的情況下可使用非腐蝕性洗滌劑。
1. Check the cleanliness of the equipment, wipe off any dust and oil stains with a clean dry cloth, and use non-corrosive detergent if possible.
2.檢查電氣成套設備銘牌是否完好。使用清潔干布半角這些銘牌清潔干凈。
2. Check whether the nameplate of complete electrical equipment is intact. Use a clean dry cloth to clean half of these nameplates.
3.擦掉灰塵、霉菌和氧化物,同時也要清潔抽出式斷路器的固定部分內部。確保斷路器室內無異物。
3. Wipe off dust, mold and oxides, and also clean the inside of the fixed part of the draw-out circuit breaker. Ensure that there is no foreign matter in the circuit breaker room.
4.用清潔干的布斷路器邊線及母線上的灰塵或污垢。
4. Use a clean and dry cloth to remove dust or dirt on the circuit breaker side line and bus.
5.確認用于端子連接的螺栓都正確地緊固,確認端子上沒有局部過熱的跡象。通過觀察接觸部分的顏色是否改變可以識別出是否發熱,接觸部分通常都是銀白色。
5. Confirm that the bolts used for terminal connection are correctly tightened and that there is no sign of local overheating on the terminal. The heat can be identified by observing whether the color of the contact part changes. The contact part is usually silvery white.
7.檢查電氣成套設備的滑動觸點或端子排上的線纜是否牢固。
7. Check whether the cable on the sliding contact or terminal block of the complete electrical equipment is firm.
8.出現設置需要維修時,請認真閱讀相關資料。
8. Please read the relevant information carefully when the setting needs to be repaired.
The above is about asking about the relevant content of "How to effectively maintain the incoming switch of electrical complete equipment?" http://m.qfpsy.com matter!