濟南機箱機柜加工時在內部規劃應較少作漆化、電鍍處理。機箱在規劃上一般使用了手動螺絲,能快捷拆開而無須動用螺絲刀,免了不少常常裝拆硬件的辛苦。
Jinan chassis cabinet processing in the internal planning should be less paint, electroplating treatment. Brand chassis generally uses manual screws in the planning, which can be quickly disassembled without using a screwdriver, avoiding the hard work of often assembling and disassembling hardware.
機箱機柜在是使用過程中散熱問題一直是機箱機柜廠家所重視的,尤其是到了夏日,除了設備本身發出的熱量之外,機箱機柜還要承載著外界的高溫考驗。機箱機柜的溫度高屬于正常現象,因為顯卡、硬盤、CPU都是發熱量非常大的配件,我們可增加一個散熱電扇應該會對散熱狀況有所改善。
The problem of heat dissipation in the process of using chassis and cabinet has always been the attention of chassis and cabinet manufacturers, especially in summer, in addition to the heat emitted by the equipment itself, the chassis and cabinet also bear the high temperature test of the outside world. The high temperature of the chassis and cabinet is a normal phenomenon, because the graphics card, hard disk and CPU are accessories with very high heat. We can add a cooling fan, which should improve the heat dissipation.
電扇適用于柜內溫度高于環境溫度,但是當關閉環境中表里循環要求阻隔時,也應該考慮工業空調器。
The electric fan is suitable for the temperature in the cabinet is higher than the ambient temperature, but when the external and internal circulation is required to be blocked in the closed environment, the industrial air conditioner should also be considered.
空調采用壓縮機制冷原理進行強制冷,實現對電氣控制柜內部溫度的恒溫控制,因為電氣控制柜表里空氣循環相互阻隔,故可以有效地防止有害、潮濕的氣體及粉塵進入柜內。
The air conditioner adopts the compressor refrigeration principle for forced cooling to realize the constant temperature control of the internal temperature of the electrical control cabinet. Because the air circulation in the surface of the electrical control cabinet is mutually blocked, it can effectively prevent harmful and humid gases and dust from entering the cabinet.
Thank you for reading, I hope the above content is helpful to you, if you want to know more wonderful content, please click: Jinan chassis cabinet http://m.qfpsy.com .